NJ 13-1975 铸铁机件 技术条件
作者:标准资料网 时间:2024-05-20 18:31:27 浏览:8190
来源:标准资料网
基本信息
| 标准名称： | 铸铁机件 技术条件 |
| 替代情况： | 被NJ 424-1986代替 |
| 发布日期： | |
| 实施日期： | 2002-09-01 |
| 首发日期： | |
| 作废日期： | |
| 出版日期： | |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 农业 林业 农 林机械与设备 农机具
Product Code:SAE AS5861
Title:Retainer, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Static Gland
Issuing Committee:A-6c2 Seals Committee
Scope: This SAE Aerospace Standard (AS) covers solid polytetrafluoroethylene (PTFE) retainers (back-up rings) for use in static glands in accordance with AS5857. They are for use in hydraulic and pneumatic system components as anti-extrusion devices in conjunction with O-rings, packings and other elastomeric seals. Because of the construction of groove dimensions, back-ups specific to rod applications are designated ?R? - Rod (Female), back-ups specific to piston applications are designated ?P? - Piston (Male).Retainers specified herein have been designed for a temperature range of -65 to 275 °F (-54 to 135 °C) and a nominal operating pressure of 3000 psi (20.6 MPa) for code 09 material and 5000 psi (34.3 MPa) for code 10 material. Material codes are based on AMS 3678 material types.
Rationale: This SAE Aerospace Standard (AS) covers solid polytetrafluoroethylene (PTFE) retainers (back-up rings) for use in static glands in accordance with AS5857. They are for use in hydraulic and pneumatic system components as anti-extrusion devices in conjunction with O-rings, packings and other elastomeric seals. Because of the construction of groove dimensions, back-ups specific to rod applications are designated ?R? - Rod (Female), back-ups specific to piston applications are designated ?P? - Piston (Male).Retainers specified herein have been designed for a temperature range of -65 to 275 °F (-54 to 135 °C) and a nominal operating pressure of 3000 psi (20.6 MPa) for code 09 material and 5000 psi (34.3 MPa) for code 10 material. Material codes are based on AMS 3678 material types.Product Code:SAE J297
Title:Operator Controls on Industrial Equipment
Issuing Committee:Hftc1, Controls, Visibility, Anthropometrics, Accessiblty
Scope:This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.
